HLQ/STM SLIDE TABLE AIR Silinda Aluminiomu TUBING
STM jara
| NO | d | E | X | T | D | H | B | C | S |
| 1 | Φ10 | 44 | 16 | 17 | 8 | 10 | 8 | 1.5 | 18 |
| 2 | Φ16 | 59 | 22 | 23 | 11 | 13 | 14 | 1.5 | 30 |
| 3 | Φ20 | 68 | 25 | 26 | 13 | 16 | 17 | 1.5 | 35 |
| 4 | Φ25 | 82 | 31 | 32 | 16 | 18 | 15 | 5 | 40 |
HLQ (φ6-25) Series Slide Table Silinda Tube
| NO | 2-d1 | A | B | C | D | E | F | G |
| 1 | φ6 | 30.6 | 17.4 | - | 5.2 | 12 | 11.5 | 10.9 |
| 2 | φ8 | 40.6 | 24 | - | 5.4 | 17 | 14.1 | 13.5 |
| 3 | φ12 | 50.8 | 28 | 12 | 6 | 20 | 19.4 | 18.5 |
| 4 | φ16 | 60.8 | 38.6 | 15.4 | 6 | 24 | 24.3 | 23.3 |
| 5 | φ20 | 70.8 | 44 | 20 | 6 | 32 | 29.6 | 28.8 |
| 6 | φ25 | 84.8 | 55 | 29 | 8 | 42 | 35.8 | 34.9 |
Awọn ohun elo ti Aluminiomu Alloy Profaili Aluminiomu pneumatic cylinder tube: aluminiomu alloy 6063 T5
Iwọn ipari wa jẹ 2000mm, ti o ba nilo gigun miiran, jọwọ larọwọto lati sọ fun wa.
Anodized dada: Inu tube-15 ± 5μm Ode tube-10 ± 5μm
Awọn adehun si apẹrẹ FESTO, SMC, Airtac, Chelic ati bẹbẹ lọ.
Ni ibamu si boṣewa ISO 6430 ISO6431 VDMA 24562 ISO15552 ati bẹbẹ lọ.
Lo fun boṣewa silinda, iwapọ silinda, mini silinda, Meji silinda Rod, Ifaworanhan silinda, Slide Table cylinder, Gripper ati be be lo Tun fun diẹ ninu awọn pataki gbọrọ.
Iṣọkan Kemikali:
| Kemikali Tiwqn | Mg | Si | Fe | Cu | Mn | Cr | Zn | Ti |
| 0.81 | 0.41 | 0.23 | <0.08 | <0.08 | <0.04 | <0.02 | <0.05 |
Ni pato:
| Kikanra ẹdọfu (N/mm2) | Agbara ikore (N/mm2) | Agbara (%) | Dada Lile | Ti abẹnu Iwọn Yiye | Ti abẹnu Roughness | Titọ | Aṣiṣe Sisanra |
| Sb 157 | S 0.2 108 | S8 | HV 300 | H9-H11 | <0.6 | 1/1000 | ± 1% |
Ifarada Ti Aluminiomu Alloy Tube:
| TOLERANCE OF Aluminium alloy TUBE | ||||||
| Bore Iwon | GBIGBE | |||||
| mm | H9(mm) | H10(mm) | H11(mm) | |||
| 16 | 0.043 | 0.07 | 0.11 | |||
| 20 | 0.052 | 0.084 | 0.13 | |||
| 25 | 0.052 | 0.084 | 0.13 | |||
| 32 | 0.062 | 0.1 | 0.16 | |||
| 40 | 0.062 | 0.1 | 0.16 | |||
| 50 | 0.062 | 0.1 | 0.16 | |||
| 63 | 0.074 | 0.12 | 0.19 | |||
| 70 | 0.074 | 0.12 | 0.19 | |||
| 80 | 0.074 | 0.12 | 0.19 | |||
| 100 | 0.087 | 0.14 | 0.22 | |||
| 125 | 0.1 | 0.16 | 0.25 | |||
| 160 | 0.1 | 0.16 | 0.25 | |||
| 200 | 0.115 | 0.185 | 0.29 | |||
| 250 | 0.115 | 0.185 | 0.29 | |||
| 320 | 0.14 | 0.23 | 0.36 | |||
FAQ:
Q1: Awọn oriṣi wo ni tabili sisun Pneumatic cylinders wa nibẹ?
A: Awoṣe ni MXS ati STM pneumatic silinda
Q2: Kini tabili ifaworanhan Pneumatic silinda?
A: Sisun tabili Pneumatic Cylinder: Pneumatic sisun tabili jẹ ẹrọ wiwakọ laini ti a lo ni lilo pupọ ni ile-iṣẹ adaṣe.O jẹ lilo pupọ ni aaye ti awọn irinṣẹ ẹrọ, ohun elo adaṣe ati awọn roboti.O ti wa ni gbogboogbo nipasẹ afẹfẹ fisinuirindigbindigbin, ati awọn laini ronu ti awọn esun ti wa ni imuse nipasẹ awọn ni idapo gbigbe ti awọn boolu konge ati laini ifaworanhan afowodimu.
Q3: Ṣe awọn anfani eyikeyi wa?
A:
1 Iwapọ iṣọpọ ti tabili sisun Pneumatic Silinda iṣẹ tabili ati Silinda Pneumatic;
2. Silinda Pneumatic ti o tọ jẹ o dara fun awọn tabili sisun pneumatic fun apejọ deede;
3. Imudani giga / giga ti o ga julọ, ohun elo ikọlu adijositabulu iyan (0-5mm);
4. Awọn sisun tabili Pneumatic Silinda adopts agbelebu rogodo guide, eyi ti o ni kekere edekoyede ati ki o le mọ dan ronu lai looseness;
5. Awọn apapo ti Pneumatic Silinda ati worktable din awọn ìwò iwọn;
6. Double-Pneumatic Silinda be ti wa ni gba lati gba lemeji awọn wu agbara;
7. Iru oruka oofa ti a ṣe sinu, a le fi sori ẹrọ iyipada oofa.
8. Pneumatic sisun tabili pneumatic Pneumatic Silinda ti wa ni gbogbo lo bi awọn gbigbe ati gbigbe ti konge èlò, ati awọn išedede jẹ jo ga.
Q4: Kini iwọn iho fun MXS?
A: Iwọn bibi naa ni Dia 6mm, Dia 8mm, Dia12mm, Dia16mm, Dia20mm
